How To Repair Phone That Drop Into Water

The first thing you have to do in order to save your wet mobile phone is to act rapidly. Quickly remove all the
detachable parts as well as covers possible such as the back cover, battery, the SIM card, memory card etc.

Next, take a piece of cloth or a tissue paper to wipe the excess water you are able to notice within the mobile phone. Make sure that you dry it completely. If you don' t do this, the water inside the mobile phone will begin to evaporate and gather in places which will be difficult to reach.
This will save your wet mobile phone and it will start working if it was under water for just a little while.


Using a hairdryer | Take a hairdryer or use a bulb and begin drying the mobile phone while giving more
consideration to the place where the battery is located. The battery housing usually consists of tiny holes to let in air (so giving more space for water) inside the mobile phone.
Make sure that you are not holding the hairdryer very near to the mobile phone. Keeping it too close to the mobile phone may harm the electrical mechanism of the mobile phone. Keep on drying the mobile phone
from a safe distance for about twenty to thirty minutes.


If solution number 1 and
solution number 2 don't work


Try solution number
3=> Drying for a long time Take off the covers as well as battery from the mobile phone. Put the phone
in a dry as well as warm place to let the water inside the phone evaporate gradually from the little holes in the mobile phone.


Best of luck!